J6700 update firmware

You are here:
< All Topics

hp20.frm    j6700 update     j6700 update(2)

在多日接二連三出貨J6700的同時,卻也意外發現到一些他x的J6700問題,令我們必須深入的探討J6700硬體及韌體之間微妙的關係;
在這之下,更新firmware就顯現出某種程度的必要性。C3700 和 J6700 工作站目前支援 HP-UX 11.0,但需昇級 PA-8700 處理器主機板
( 至 2.3 版),才能支援 HP-UX 11i v1,而2306的CPU有支援,所以能安裝11i以後的版本,而CPU型號為2206並沒有支援,而主機板的
firmware又間接的影響可否支援11i,因為主機板firmware要在1.7以上的版本才能順利安裝11i v1,所以除了CPU的問題之外還
有firmware的問題,所以更新也成了一個重要的步驟。

有支援的CPU如下

B.11.11 HP-UX 11i v1 PA-RISC
B.11.20 HP-UX 11i v1.5 Intel@ Itanium@
B.11.22 HP-UX 11i v1.6 Intel@ Itanium@
B.11.23 HP-UX 11i v2 Intel@ Itanium@

 

首先先用遠端將檔案放入我們這邊,所以利用ftp連入我們這一端。

帳號密碼則由我們這邊給他,又或是使用一般使用者(anonymous)登入

到下指令到你要存放firmware的目錄之後再用mput將檔案到桌面。

前置準備完成後,接下來就是確認硬碟,確認J6700的硬碟路徑,好將檔案放入硬碟中。

# ioscan -fnC disk

則show出下列的表單:

Class     I  H/W Path       Driver S/W State   H/W Type     Description
=======================================================================
disk      0  10/0/14/0.0.0  sdisk CLAIMED     DEVICE       HL-DT-STDVD-ROM GDR8163B
/dev/dsk/c0t0d0   /dev/rdsk/c0t0d0
disk      1  10/0/15/1.5.0  sdisk CLAIMED     DEVICE       SEAGATE ST318404LC
/dev/dsk/c3t5d0   /dev/rdsk/c3t5d0
disk      2  10/0/15/1.6.0  sdisk CLAIMED     DEVICE       SEAGATE ST336754LC
/dev/dsk/c3t6d0   /dev/rdsk/c3t6d0

接下來就是將新裝上的硬碟掛上系統!!

# strings /etc/lvmtab                                                                 //查看Mirror(掛載)情况//
/dev/vg00
/dev/dsk/c3t5d0

# pvcreate -fB /dev/rdsk/c3t6d0                                                 //做成Mirror//
Physical volume “/dev/rdsk/c3t6d0” has been successfully created.

# dd if=/tmp/hp20.frm of=/dev/rdsk/c3t6d0 bs=2k                      //將檔案複製到c3t6d0裡//
1666+0 records in
1666+0 records out
# sync
# cd
# shutdown -hy 0                                                                     //快速關機//

重開機後只留firmware的硬碟後開機。

—– Main Menu ————————————————————-

Command                                           Description
——-                                               ———–
BOot [PRI|ALT|<path>]                     Boot from specified path
PAth [PRI|ALT|CON|KEY [<path>]]     Display or modify a path
SEArch [DIsplay|[[IPL] [<path>]]]      Search for boot devices

COnfiguration [<command>]              Access Configuration menu/commands
INformation [<command>]                 Access Information menu/commands
SERvice [<command>]                      Access Service menu/commands

DIsplay                                            Redisplay the current menu
HElp [<menu>|<command>]             Display help for menu or command
RESET                                             Restart the system
——————————————————————————

Main Menu: Enter command > SEA                                //搜尋硬體設備//

Searching for potential boot device(s)…
This may take several minutes.

To discontinue search, press any key (termination may not be immediate).

Path Number        Device Path                          Device Type
———–        —————–                       ———–
P0                 LAN.192.168.1.245.3.254         192.168.1.245   100/Full Dx
P1                 IDE                                         CD-224E
P2                 FWSCSI.5.0                             SEAGATE ST336754LC

Main Menu: Enter command > BO P2                            //boot p2這個位置的裝置//
Interact with IPL (Y, N, Q)?> n

Booting…
Boot IO Dependent Code (IODC) revision 0

HARD Booted.

ISL Revision A.00.38  OCT 26, 1994

ISL booting  ode fupdate; update pdc

************************************************************
******                                                                                       ******
******                    Offline Diagnostic Environment                        ******
******                                                                                       ******
******          (C) Copyright Hewlett-Packard Co 1993-2001             ******
******                             All Rights Reserved                               ******
******                                                                                       ******
******  HP shall not be liable for any damages resulting from the     ******
******                           use of this program.                               ******
******                                                                                       ******
******                            TC  Version A.02.23                              ******
******                            SysLib Version A.00.75                          ******
******                            Loader Version A.00.62                          ******
******                            Mapfile Version A.01.37                          ******
******                                                                                       ******
************************************************************

Type HELP for command information.
ISL_CMD> fupdate; update pdc

***************************************************************
******                                                                                           ******
******                             FUPDATE                                                 ******
******                                                                                           ******
******       Copyright (C) 1996-2001 by Hewlett-Packard Company      ******
******                          All Rights Reserved                                      ******
******                                                                                           ******
******   HP shall not be liable for any damages resulting from the        ******
******                       use of this program.                                       ******
******                                                                                           ******
******                         Version A.01.24                                           ******
******                                                                                           ******
***************************************************************
Please wait while I map the system: Done.
Cannot get module’s product string.  Continuing
Please wait while I examine the LIF for F/W files: Done.

Type HELP for command information.

File Name  | Intended Product                              | Version
————+———————————————–+———-
PDC        | 9000/785 C3650/C3700/J6700 PDC                | 2.0

**************************************************************
*                          WARNING!                          *
* Downloading incorrect F/W to a module can cause permanent  *
* damage to the module or card you are downloading to.       *
* DO NOT INTERRUPT THIS PROCESS OR THE MODULE MAY BE DAMAGED!*
**************************************************************
F/W file Note:
Built Mon Apr 14 14:57:06 MDT 2003 by fwbtr.

Continue ([y]/n)? y                                     //問你是否要更新//

**************************************************************
* CPU Firmware will now be downloaded.  It should take no    *
* more than 2 minutes.  When the Firmware is successfully    *
* downloaded, the CPU will automatically reboot.  However,   *
* if the download failed and the system is hung, based on    *
* your system, you will most likely have to manually replace *
* either the Flash Memory chip or the CPU board.  Rebooting  *
* manually may work but most likely will not.                *
**************************************************************

**************************************************************
*              Firmware downloaded SUCCESSFULLY!             *
**************************************************************

THIS UTILITY WILL NOW RESET THE SYSTEM….

 

 

重開機後就算完成更新了!!!

附件上傳者:onizka

Previous IP KVM
Next KYON – HP UNIX 系統安裝 (HP UX-11i 2006)
Table of Contents