Juniper autorecovery ALARM燈號消除方式

You are here:
< All Topics

剛拿到SRX210預設有這個警告訊息,又會讓前面面板亮紅燈Alarm

console(9600,8,n,1)[預設登入帳號:root,沒有密碼]

連接console後開完機會跳出這個訊息:

default warning ‘autorecovery information needs to be save’

這個訊息是在機器做還原後會跳出的一個訊息

亮著橘燈看起來就有點討厭,就來動手把它清除掉吧

srx210

這時我們要在console裡下一個指令

request system autorecovery state save

首先先輸入cli 叫出文字系統介面

然後輸入上列的文字後[Enter]

srx210-1

save完成之後ALARM的橘燈就會消失

srx210-2

 

JUNOS Alarm LED 燈號

因為有幾個狀況會導致它紅色或橘色,有些東西處理後,它就會變回綠色了。

Managerment Port

在有獨立 Management Port 的機器 (EX, J-router, M-router),如果Manager 沒有 Link UP, LED 就會顯示紅色

# set chassis alarm management-ethernet link-down ignore
# run request system configuration rescue save

Minor Rescue configuration is not set

適用於所有 SRX & EX 系列,其實這指令是對 config 進行額外備份的動作。

root> request system configuration rescue save

參考資料
原文:request system autorecovery state save
————————————————————————————————

Save the current state of the disk partitioning, configuration, and licenses for autorecovery.

The active Junos OS configuration is saved as the Junos rescue configuration, after which the rescue configuration, licenses, and disk partitioning information is saved for autorecovery. Autorecovery information must be initially saved using this command for the autorecovery feature to verify integrity of data on every bootup.

Any recovery performed at a later stage will restore the data to the same state as it was when the save command was executed.
A fresh rescue configuration is generated when the command is executed. Any existing rescue configuration will be overwritten.

請求系統自動恢復狀態保存

保存磁盤分區,配置和許可證的自動恢復的當前狀態。

活動的Junos操作系統配置保存為Junos救援配置,之後保存救援配置,許可證和磁盤分區信息以進行自動恢復。 必須首先使用此命令保存自動恢復信息,以便自動恢復功能在每次引導時驗證數據的完整性。

在稍後階段執行的任何恢復將數據恢復到與執行保存命令時相同的狀態。
執行命令時會生成新的救援配置。 任何現有救援配置將被覆蓋。

Next Juniper SRX 正確關機步驟
Table of Contents