Multitech調整與設定

You are here:
< All Topics

這次我們要教各位的是一台數據機,這台數據機並不一般,它可搭載16張數據卡,
即相當於同時安裝16台數據機,所以使用上更加多元化。
首先我們必須先從網址上下載三個檔案
http://www.multitech.com/en_US/SUPPO…/software.aspx(此連結已無效)
下載flashwiz2002.exeglobalwizard3010.exe(此檔已無效)
http://www.multitech.com/en_US/SUPPO…s_archive.aspx(此連結已無效)
下載 drivers.exe
接著安裝兩個程式,一個叫Flash Wizard,一個叫Global Wizard,這兩個軟體
一個是更新分位用一個是設定用;安裝後再安裝驅動程式。
將drivers.exe解開放在新增的資料夾中,接著到控制台->電話及數據機選項->數據機,
在下面按下新增->從磁片安裝,選擇剛才解開的drivers檔案,找出其驅動並安裝。

安裝後即可使用,並再用global wizard設定。

更新是相當重要的一環,所以接下來我們要講的是分位更新;首先將Flash Wizard打開,將數據機接上
後按下一步

接下來就會自動執行,完成後按下完成按紐即更新完畢。

#1 DTR Forced/ UP* DTR forced from
DTR from Interface * DOWN computer/terminal
#2 Flow Control &E4* UP* Hardware flow
(Async/Dial-Up/Leased Line) DOWN control enabled
#2 SDLC*/BSC (Sync) UP* SDLC enabled
DOWN
#3 Result Codes Enabled* UP Modem responses
(Async Dial-up) DOWN* are echoed
#3 DbM Transmit -15dB/-11dB* UP Lease Line
(Async/Sync/Leased Line) DOWN* transmits at -11dB
#4 UUCP Disabled* (Async UP* UUCP
Dial-Up/Leased Line) DOWN “spoofing” Disabled
#4 AS/400 Mode Disabled* UP* AS/400 Mode
(Sync Dial-Up/Leased Line) DOWN Disabled
#5 Auto-Answer Enabled* UP* Auto-Answer
Async/Sync/Dial-Up) DOWN in dial-up mode
#5 Answer/Originate* UP* Originate call in
(Async/Sync/Leased Line) DOWN Lease Line mode
#6 Max-Throughput Enabled* UP* Modem set-up to
(Async/Dial-Up/Leased) DOWN operate at highest
efficiency level
#6 Slave Clock Disabled* UP* Clock controlled
(Sync/Dial-Up/Leased) DOWN by remote device
#7 RTS/Normal/Forced* UP RTS Forced On
(Sync/Async/Dial/Leased) DOWN*
#8 Command Mode Enabled* UP Command Mode
(Sync/AsyncDial/Leased) DOWN* Enabled
#9 Local/Remote LoopBack* UP Remote
(Async/Sync/Dial/Leased) DOWN* LoopBack Enabled
#10 Dial-Up*/Leased-Line UP* Dial-Up Enabled
DOWN
#11 “AT”/Multi-Tech Result Codes UP Multi-Tech Result
(Asynchronous) DOWN* Codes Enabled
#11 Internal*/External Clocking UP Selects Transmit
(Synchronous) DOWN* Clock Source
#12 Sync/Async Mode* UP Async Enabled
DOWN*

13/14 UP/UP* 28.8 K bps Operation (Default)
13/14 DOWN/UP 19.2 K bps Operation
13/14 UP/DOWN 14.4 K bps Operation
13/14 DOWN/DOWN 9600 bps Operation
#15 UP* CD/DSR from Interface
#15 DOWN CD/DSR Forced On
#16 UP Used in combination with
#16 DOWN DIP-Switch #9/Loopback Tests

卡上的設定如下:
1 UP
2 UP
3 DOWN
4 UP
5 UP
6 UP
7 DOWN
8 DOWN
9 DOWN
10 UP
11 DOWN
12 DOWN
13 UP
14 UP
15 UP
16 DOWN
原來卡上設定(非初始設定)
1 DOWN
2 UP
3 DOWN
4 UP
5 DOWN
6 DOWN
7 DOWN
8 UP
9 DOWN
10 DOWN
11 DOWN
12 DOWN
13 DOWN
14 DOWN
15 UP
16 UP

 

附件上傳者onizka

Previous Larry-藍芽 to RS-232
Next TSUNA-AASTRA電話設定(用於FREEPBX)
Table of Contents